; cncfoam.com — 2026-05-24T07:06:16.229Z
; Feedrate 22 mm/s (1320 mm/min)
; Pre-heat 800 ms
; Material block 400 x 300 x 600 mm
; 16 motion records

G90 G17 G21    ; absolute, XY plane, millimetres
; (G92 zero-axes line OMITTED — "Machine has no homing switches" is ON)
; Jog the wire to your work-zero position before pressing Run.

G0 X30 Y30 U193.138 V9.72 F3000
G0 X125.1 Y30 U193.138 V104.82
M8    ; hot wire on
G4 P0.80    ; pre-heat dwell 800 ms
G1 X125.1 Y30 U193.138 V104.82 Z0 W0 F1320
G1 X148.61 Y97.635 U125.502 V128.33
G1 X220.2 Y99.094 U124.043 V199.92
G1 X163.14 Y142.354 U80.784 V142.86
G1 X183.875 Y210.891 U12.247 V163.595
G1 X125.1 Y169.992 U53.146 V104.82
G1 X66.325 Y210.891 U12.247 V46.045
G1 X87.06 Y142.354 U80.784 V66.78
G1 X30 Y99.094 U124.043 V9.72
G1 X101.59 Y97.635 U125.502 V81.31
G1 X125.1 Y30 U193.138 V104.82
M9    ; hot wire off
G0 X125.1 Y30 U193.138 V104.82 Z5 W5 F3000
G0 X0 Y0 U0 V0
M30    ; end of program